WEST SYSTEM - EPOXY RESIN

FGI -POLYESTER RESIN

INTERNATIONAL PAINT

DEKS OLJE

FEAST WATSON

FIBREGALSS TAPE

SIKAFLEX

DURALAC

 This internationally renowned varnish results in a full gloss finish. The polyurethane resin based formula gives a tough finish for interior or exterior use and also gives excellent exterior durability.

Goldspar is quick drying and is also very easy to apply.

Area: Above water
Finish/Sheen: High Gloss
Thinner: Enamel Thinner #1
Number of Coats:
6 minimum for temperate
10 minium for semi-tropical exterior / tropical exterior
3 minimum for interior
Coverage: (Theoretical) - 18.00 (m2/lt)
Application: Brush, Roller, Airless Spray, Conventional Spray, Airmix 

Available 250ml  500ml    1L      2L

BRIGHTSIDE GLOSS is a superior quality one-pack polyurethane enamel that is quick-drying and applies with superb flow characteristics which allows a sprayed on appearance to be achieved by brush application. It is the only yacht finish in the world that contains Teflon, producing not only a very hard , tough finish but also one that is very easy to keep clean. Brightside is available in a range of 14 bright, high gloss colours. For use above the waterline only.
                       

l

 Optimum performance antifouling. High copper content, self polishing technology ablates slowly over time. Re-coats most existing anti-fouling with normal surface preparation. DO NOT USE ON ALUMINIUM OR ZINC SURFACES

Interprotect Epoxy Primer. Rapid dry epoxy primer/sanding undercoat. A two-pot mix for use above and below the waterline on steel, timber and aluminium. Applied directly to fibreglass - helps in Osmosis protection.

Prekote is a white, one-pack, easy to use undercoat with excellent covering power and easy sanding properties.

Do not apply two-pack systems over this product.

Do not use on areas that are permanently immersed.
 

Epoxy Thinner and Cleaning Fluid use as a degreaser before painting fibreglass or aluminium. Thinning two part epoxies and cleaning up after spraying or using epoxy resin or glues.
 

SEE INSTORE FOR FULL RANGE OF PAINT

WEST SYSTEM® brand epoxy products have been developed specifically for the marine industry and have been internationally marketed for over 30 years. Thousands of boats, and a variety of other applications, have been successfully completed using WEST SYSTEM® brand products, from the cold of North America and Europe, to the tropical conditions of Malaysia and Central America.

The two-part liquid systems are ideal for laminating and coating, and with the addition of a range of powder modifiers, can become strong, durable, waterproof glues or filling compounds. 

 

A concentrated general purpose cleaner for all seagoing cleaning jobs. Removes dirt, oil, film, fuel and soot from decks, hulls or bilges whether fibreglass, steel or wood. Can be diluted with either salt or fresh water and totally harmless to any material used on boats including brass, aluminium, rubber, perspex, plastic, painted and varnished surfaces, ropes and sails. Non solvent and biodegradable

1L AND 4L

OTHER CHEMTECH PRODUCTS IN STORE

Ideal for restoring weathered or rough surfaces. Suitable for use on fibreglass or enamel surfaces. Excellent on yachting materials such as fibreglass and stainless steel

Contains waxes to promote high lustre and depth of colour
Contains silicone to ensure long lasting shine
Contains effective abrasives to remove marks, scuffing and surface oxidation
No-run paste formulation
 

Ideal for restoring chalked and deteriorating surfaces. Ideal for preparing fibreglass surfaces and detailing fibreglass moulds. Excellent on yachting materials such as fibreglass and stainless steel

Waxless, silicone-free formula - can be overpainted
Designed for power buffing
Liquid formulation

Miracle Coat Paste goes straight on, or over any wax, to add a shield of shine that lasts all season long. The durable diamond-bright coating protects both wax and finish against dust, dirt, chalking, sunlight, salt spray and droppings. 312g tub
 

Restore fresh colour and depth to oxidised fibreglass or painted finsihes. This two way paste cleaner/wax is ultra heavy duty - works better than simple rubbing compunds with a fraction of the work. Simply wipe on with damp cloth, let dry, then wipe off. Use it in sun or shade with equal ease. Teamed with miracle coat there's no finer shine. 312g tub.

 

An easy to apply oil based finish, suitable for all types of wood, providing excellent protection in a durable, natural looking, translucent satin coating. Designed for all applications above the waterline, Cetol is Ideal for exterior work. Uses Thinner # 1.

Colour: Teak,Natural         Size: 750ml 

 

This is an alternative finish that gives wood a bright, rich look and it is easy to use and even easier to maintain. Deks Olje is an oil treatment for wood that was developed in Norway. Deks Olje #1 is a basic oil treatment that gives wood a matt finish. If you want a glossier finish more resembling varnish, you must use Deks Olje #1 followed by Deks Olje #2.
 

Marine Petrol can be used alone to restore lustre to faded fibreglass and as a paint additive for wood and metal primers to increase penetration and ahesion. What's more, when it's added to enamels and spar finish, brushing is easier, there's less drag and pull and fewer lap marks. Polishes and protects all metals and therefore, great for use on metal outdoor furniture. 1 litre.
 

 Designed to remove discolouration, water stains, scuff marks and rust from fibreglass, aluminium, stainless, chrome and steel without affecting the gloss.
This product is by far this range of products most popular line.

Available in 1ltr, 2.5ltr, 5ltr and 20ltr containers
 

 Zinc anodes. To suit propellor shafts, stainless nuts & bolts supplied.

Size range from 3/4" to 2"

 2 piece anodes for mounting on either side of the rudder.

 Streamline zinc teardrop anodes with galvanised straps

 Block anodes with galvanised straps.